kap
kap


Author Comment Last activity Moderation
warren "Great advice on the "tilting" fix -- this affected one of Liz's squids and we struggled to adjust the bridle, eventually giving up. I posted this ..." | Read more » over 6 years ago
cfastie "Thanks guys. I started the SkyPod wiki. I'm never sure what constitutes an Activity, but maybe there will be some obvious ones eventually. " | Read more » almost 7 years ago
warren "This is very cool. Chris, any interest in starting a /wiki/skypod page, where we could collect Q&A and such? I was about to ask about the weigh..." | Read more » almost 7 years ago
patcoyle "Very nice, Chris. " | Read more » almost 7 years ago
mathew "I often get tripped up on the firmware upload stage; https://publiclab.org/notes/abdul/06-22-2016/infragram-plant-cam#Installing+config+file The c..." | Read more » about 7 years ago
warren "Hmm, i have an older one, so the firmware may have changed. Maybe best to ask about this on the main Grassroots Mapping list, as I think I remember..." | Read more » about 7 years ago
jbreen "You had me at "squid-shaped kite." I've been using the DIY Mini Kite Kit but for the life of me cannot seem to get the Mobius camera to go into ti..." | Read more » about 7 years ago
sarasage "Fantastic post! Would love to replicate this! " | Read more » about 7 years ago
patcoyle "Chris, yes, it was a while ago, but this note: https://publiclab.org/notes/patcoyle/05-01-2014/anoter-example-using-free-sfm-tools-to-model-saugus-..." | Read more » over 7 years ago
cfastie "Thanks Pat, I recall that you might have tried Meshlab with this type of data. Were you able to do some quantitative analysis (e.g., volume) with M..." | Read more » over 7 years ago
patcoyle "Thanks Chris. Nice example of use of the surface from motion tools, ICE, Google Earth, and more of the Autodesk tools' capabilities. " | Read more » over 7 years ago
Hedgehopper "Hi, great simple Rig for KAP!! Where can I get or buy these Kit? Thanks Mirco " | Read more » over 7 years ago
warren "Thanks for the link! So many colors :-) -- " | Read more » over 7 years ago
shanlter "The squid looks so nice in the sky! Here is the link: https://detail.tmall.com/item.htm?spm=a230r.1.0.0.YLWxJc&id=44263991526&ns=1&skuI..." | Read more » over 7 years ago
liz "The delivery was convenient too -- we bought a dozen, and they were shipped in a tape-wrapped tarp to a local mini-mart in Guangzhou where we picke..." | Read more » over 7 years ago
mathew "omg you're kidding me that is so cheap this kite is so awesome " | Read more » over 7 years ago
liz "The 5.5M kite was ~USD$4 on taobao in mainland China -- @shanlter can you post the link to the taobao store that you helped me buy from? " | Read more » over 7 years ago
cfastie "That works. Nice model. Is that Preview or Ultra mode? " | Read more » over 7 years ago
mathew "Ok, I changed the sharing settings. how about now? here is the project gallery link; https://recap.autodesk.com/gallery/project/616/japanese-americ..." | Read more » over 7 years ago
cfastie "Mathew, Your model is not loading. It says there is a "temporary" problem. I will try again later. " | Read more » over 7 years ago
mathew "I made a 3D file from those images: https://recap360.autodesk.com/fireflyviewer/77a3022e96ca4a818ce8ef862aa65b35 I wasn't able to process the whol..." | Read more » over 7 years ago
mathew "That's a good point about the instructions. if they were teased out into the different rig designs and each set of instructions stuck to one desig..." | Read more » over 7 years ago
mathew "Yes! " | Read more » over 7 years ago
cfastie "Maybe if I designate one type (1/4" ID) for use with the dowels and the other (5/16" ID) for use with the tubing that would be easier to follow? Wh..." | Read more » over 7 years ago