Author | Comment | Last activity | Moderation | ||
---|---|---|---|---|---|
tonyc | "No need for a computer. The mobius has a power saving mode that puts it into hibernate between shots as long as interval is greater than 5minutes. ..." | Read more » | over 8 years ago | |||
tonyc | "Here's a bit more detailed image of how the CCD sensor unit is secured by the sheet metal of the socket. Just a happy coincidence the sizes on the ..." | Read more » | over 8 years ago | |||
tonyc | "@gretchengehrke " | Read more » | over 8 years ago | |||
tonyc | "I should note this thing relies on using an extension to allow you to separate the lens module from the camera body. These are widely available for..." | Read more » | over 8 years ago | |||
tonyc | "Just a catchup here: I've continued to tinker with the idea, and have a few notes. The two ways to add power to the camera seem to be through att..." | Read more » | over 8 years ago | |||
tonyc | " Here is the rig, using a ribbon cable and a simple trickle solar phone charger to keep it going. " | Read more » | almost 9 years ago | |||
tonyc | "Sounds like we'll actually be deploying one of these in the field soon, as part of WI frac sand efforts. Very exciting! I went ahead and bought thi..." | Read more » | almost 9 years ago | |||
tonyc | "I used new firmware, which had the ability to do low power mode on any interval over 5mins. I use 6 min interval, to be safe, and it allows camera..." | Read more » | almost 9 years ago | |||
tonyc | "One more: http://store.publiclab.org/collections/under-development/products/diy-camera-mount-materials-bundle I included a nylon threaded stud in ..." | Read more » | almost 9 years ago | |||
tonyc | "Update on longevity: I inadvertently left a mobius running the intervelometer at every 6mins over the week of staff retreat. I now have 2490 of the..." | Read more » | almost 9 years ago | |||
tonyc | "The new firmware has a hibernate function, so you don't need to do this. You just let the mobius turn itself on and off, and let your additional po..." | Read more » | almost 9 years ago | |||
tonyc | "Today I got the solar phone charger and 32GB sd card, so I built a crude outdoor housing and asked for permission to throw this thing on the roof f..." | Read more » | almost 9 years ago | |||
tonyc | "The settings I used for the above time lapse, from the config file for mobius camera: Photo Set Time Lapse Shooting=[8],0:off,1:0.25s,2:0.5s,3:1s,..." | Read more » | almost 9 years ago | |||
tonyc | "those are mms, on the measuring tape, btw. Guess I cropped the most important part scale out of the photo! " | Read more » | almost 9 years ago | |||
tonyc | "this is set up to use light from above, so had to force it to get an image on an opaque object. it think there is a lot of room to get better magn..." | Read more » | almost 9 years ago | |||
tonyc | " waterscope_optics_module.pdf Using a Pi cam and some optics from alibaba that runs about $20, you can get sub-micron quality. This image made..." | Read more » | almost 9 years ago | |||
tonyc | "Very cool to see what they came up with. I see they are using the velcro cable ties on the pole mount. And that they'd cut the zip tie at the end o..." | Read more » | about 9 years ago | |||
tonyc | "I wanted to verify the paperclip wasn't in danger of shorting anything out inside the camera, so opened it up to find it can come in contact with t..." | Read more » | about 9 years ago | |||
tonyc | "Couple things. I realized the mobius with the new lenses can be focused manually, just by screwing the lens further in or out. This was hit and mis..." | Read more » | about 9 years ago | |||
tonyc | "Cool. I'm thinking having the camera with stock lens, and camera with 6mm lens. Then offering the range of lenses as individual items for people w..." | Read more » | about 9 years ago | |||
tonyc | "Committed to Altitude, the Pat Coyle Story, coming soon to a bookstore near you... My final contribution for the day: I'm happy with how strong yo..." | Read more » | about 9 years ago | |||
tonyc | "Mainly just safety. just looking for something that would be a "positive lock" between the camera and the kite so nothing squirted out, or in case ..." | Read more » | about 9 years ago | |||
tonyc | "big problem I can see is the zip tie allows a wobble that would introduce big jello effect and blur in real wind. I liked the dowel because it was ..." | Read more » | about 9 years ago | |||
tonyc | "Very cool, Chris! Thanks for the ideas on this. I still think my method is a bit fussy for public consumption, as it requires some dexterity to ge..." | Read more » | about 9 years ago |