tonyc 22 research notes and 77 wiki edits | Joined almost 4 years ago

Kits program coordinator






$1 Aerial Rig

by tonyc almost 3 years ago | 1 | 562 views | 2


Design Specifications for Field Camera

by tonyc almost 3 years ago | 1 | 349 views | 0


Mobius TrapCam Housing

by tonyc almost 3 years ago | 7 | 581 views | 3




Mobius MicroCam

by tonyc over 3 years ago | 4 | 1,084 views | 1


Rollup of mobius pendulum kit ideas

by tonyc over 3 years ago | 1 | 1,026 views | 3



Method for attaching Picavet rig to Pole Kit

by tonyc over 3 years ago | 0 | 573 views | 1


Mobius Picavet Rig

by tonyc over 3 years ago | 7 | 1,433 views | 4


Riffle testing

by tonyc over 3 years ago | 5 | 785 views | 0


Another low-fi pendulum rig

by tonyc over 3 years ago | 9 | 816 views | 2


config file for kits mobius cameras

by tonyc over 3 years ago | 2 | 1,142 views | 3


"Judo Rig" for aerial photography

by tonyc over 3 years ago | 6 | 1,648 views | 2



soda bottle rig for pendulum suspension

by tonyc over 3 years ago | 6 | 1,818 views | 1


proof of concept, stacking cuvette frame design

by tonyc over 3 years ago | 1 | 1,577 views | 2



pole mapping kit ideas

by tonyc over 3 years ago | 5 | 1,432 views | 1



Mounting rig for the Riffle

by tonyc over 3 years ago | 4 | 1,613 views | 2


Tracking Oil Trains Using RFIDs

by tonyc almost 4 years ago | 3 | 1,134 views | 2


An "open open hardware" development cycle

by warren over 3 years ago | 4 | 1,694 views | 2

Greetings! Starting today, we're adopting a more open, but also more integrated development proce...

Read more


View these maps at MapKnitter.org »

Title Creation date Image

Comments

Comment Last activity Moderation
"Improvements for next round: shorter tube for top piece, the length that connects to the top chopsticks. By shortening, will cut down weight, but..." | Read more » almost 3 years ago
"The other option was the zip tie only method from all my little pendulum rig notes. You snug up a zip tie as tight as you can, then slide if off th..." | Read more » almost 3 years ago
"another thought is using a rubber band wrapped around the dowel, then clamped with a small zip tie. The combination of pressure from the tie on the..." | Read more » almost 3 years ago
"No need for a computer. The mobius has a power saving mode that puts it into hibernate between shots as long as interval is greater than 5minutes. ..." | Read more » almost 3 years ago
"check out this tool, using reagents: here may be what you are looking for? " | Read more » almost 3 years ago
"Here's a bit more detailed image of how the CCD sensor unit is secured by the sheet metal of the socket. Just a happy coincidence the sizes on the ..." | Read more » almost 3 years ago
"Yeah, the screen could have GPS coords and the start time. the photos are taken at increments, so you can determine time from which image in the se..." | Read more » almost 3 years ago
"@gretchengehrke " | Read more » almost 3 years ago
"I should note this thing relies on using an extension to allow you to separate the lens module from the camera body. These are widely available for..." | Read more » almost 3 years ago
"Just a catchup here: I've continued to tinker with the idea, and have a few notes. The two ways to add power to the camera seem to be through att..." | Read more » almost 3 years ago
"Have you all seen the PhotosynQ project? It is an LED based device using reflectance to measure leaf chlorophyl. it started as an incubated kit on ..." | Read more » almost 3 years ago
"That's a really cool use case I hadn't heard of before! Is it something you've had luck with using the PL spectrometer, reading fruit? I imagine e..." | Read more » almost 3 years ago
"Is the form factor your main concern in these designs? I'm curious what is the test you are trying to run in the field with the spectrometer? " | Read more » almost 3 years ago
"For oblique shots, there's a simple way to hang a miniball tripod head off the bottom of a pendulum. Did you use the wire to connect the PVC to t..." | Read more » about 3 years ago
"You do have a rye sense of humor, Chris. A groan is my highest compliment. Some people prefer laughs, but I'm a groan man. Did you just tape the P..." | Read more » about 3 years ago
""Graze Anatomy" Groan! What made you use the short pendulum shaft? Just desire to keep it off the ground as much as possible? Or was there somethi..." | Read more » about 3 years ago
"I'd like to do a screencap to show just how smooth this movement is. This is so cool to see in action. Exciting to see it built from plans to deplo..." | Read more » about 3 years ago
" Here is the rig, using a ribbon cable and a simple trickle solar phone charger to keep it going. " | Read more » about 3 years ago
"Sounds like we'll actually be deploying one of these in the field soon, as part of WI frac sand efforts. Very exciting! I went ahead and bought thi..." | Read more » about 3 years ago
"I used new firmware, which had the ability to do low power mode on any interval over 5mins. I use 6 min interval, to be safe, and it allows camera..." | Read more » about 3 years ago
"One more: http://store.publiclab.org/collections/under-development/products/diy-camera-mount-materials-bundle I included a nylon threaded stud in ..." | Read more » about 3 years ago
"Update on longevity: I inadvertently left a mobius running the intervelometer at every 6mins over the week of staff retreat. I now have 2490 of the..." | Read more » about 3 years ago
"The new firmware has a hibernate function, so you don't need to do this. You just let the mobius turn itself on and off, and let your additional po..." | Read more » about 3 years ago
"Today I got the solar phone charger and 32GB sd card, so I built a crude outdoor housing and asked for permission to throw this thing on the roof f..." | Read more » about 3 years ago























Tags

Tags organize our knowledge base. Click to learn more or subscribe to a topic.



RSS feed for tonyc


Wiki pages recently contributed to