My First Video Tutorial:
Public Lab is an open community which collaboratively develops accessible, open source, Do-It-Yourself technologies for investigating local environmental health and justice issues.
If you cannot use the ReCaptcha to verify you are not a bot, use this alternative verification.
By signing up, you agree to the Code of Conduct, which applies to all online and in-person spaces managed by the Public Lab community and non-profit.
As an open source community, we believe in open licensing of content so that other members of the community can leverage your work legally -- with attribution, of course. By joining the Public Lab site, you agree to release the content you post here under a Creative Commons Attribution Sharealike license, and the hardware designs you post under the CERN Open Hardware License 1.1 (full text). This has the added benefit that others must share their improvements in turn with you.
sign up to join the Public Lab community
Forgotten or lost your password? Reset it by clicking here
I included a nylon threaded stud in the kit, thinking it would be possible to attach to the pendulum allowing a camera to be attached with a mini ball tripod head, for oblique photos.
Turned out it was easier than i thought.
I tried it like so:
And it turns out to be super strong. The zip tie binds into the rubber band when you tug on it, and I managed to do a swing test at "whoosh-whoosh" speeds in the office. It is not falling off!
Reply to this comment...
Log in to comment
Login to comment.
This is part of: