Revisions for Simple Air Sensor
| 46 CURRENT | a1ahna |
November 06, 2020 21:33
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. Parts List
Air Quality MonitoringThe Simple Air Sensor can be used:
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 45 | a1ahna |
November 06, 2020 21:10
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. Parts List
[notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used:
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 44 | a1ahna |
November 06, 2020 21:09
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used:
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 43 | a1ahna |
November 06, 2020 20:53
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used:
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 42 | a1ahna |
November 06, 2020 20:52
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used:
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 41 | a1ahna |
November 06, 2020 20:51
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used:
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 40 | a1ahna |
November 06, 2020 20:50
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used:
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 39 | a1ahna |
November 06, 2020 20:20
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used:
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 38 | a1ahna |
November 06, 2020 20:19
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used: * to see immediate qualitative differences in air quality by displaying a realtime colored light readout. * to examine how the particulate sensor used in the closed source #PurpleAir responds to varying air conditions * to build familiarity with the electronic components used in air sensors without having to program * to use in groups (with 3+ sensors) to plan out placement of a PurpleAir or other more expensive sensor, with consideration for wind direction and spacing, for example. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 37 | a1ahna |
November 06, 2020 20:12
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used: * to see immediate qualitative differences in air quality by displaying a realtime colored light readout. * to examine how the particulate sensor used in the closed source #PurpleAir responds to varying air conditions * to build familiarity with the electronic components used in air sensors without having to program * to use in groups (with 3+ sensors) to plan out placement of a PurpleAir or other more expensive sensor, with consideration for wind direction and spacing, for example. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 36 | a1ahna |
November 06, 2020 20:09
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used: * to see immediate qualitative differences in air quality by displaying a realtime colored light readout. * to examine how the particulate sensor used in the closed source #PurpleAir responds to varying air conditions * to build familiarity with the electronic components used in air sensors without having to program * to use in groups (with 3+ sensors) to plan out placement of a PurpleAir or other more expensive sensor, with consideration for wind direction and spacing, for example. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 35 | a1ahna |
November 06, 2020 20:08
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). Parts List
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. [notes:grid:SAS-build] Air Quality MonitoringThe Simple Air Sensor can be used: - to see immediate qualitative differences in air quality by displaying a realtime colored light readout. - to examine how the particulate sensor used in the closed source #PurpleAir responds to varying air conditions - to build familiarity with the electronic components used in air sensors without having to program - to use in groups (with 3+ sensors) to plan out placement of a PurpleAir or other more expensive sensor, with consideration for wind direction and spacing, for example. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 34 | a1ahna |
November 06, 2020 20:03
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). [notes:grid:SAS-build] This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Air Quality MonitoringThe Simple Air Sensor can be used: - to see immediate qualitative differences in air quality by displaying a realtime colored light readout. - to examine how the particulate sensor used in the closed source #PurpleAir responds to varying air conditions - to build familiarity with the electronic components used in air sensors without having to program - to use in groups (with 3+ sensors) to plan out placement of a PurpleAir or other more expensive sensor, with consideration for wind direction and spacing, for example. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Parts List
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 33 | a1ahna |
November 06, 2020 19:56
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). [notes:grid:SAS-build] This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Air Quality MonitoringThe Simple Air Sensor can be used: * to see immediate qualitative differences in air quality by displaying a realtime colored light readout. *to examine how the particulate sensor used in the closed source #PurpleAir responds to varying air conditions * to build familiarity with the electronic components used in air sensors without having to program * to use in groups (with 3+ sensors) to plan out placement of a #PurpleAir or other more expensive sensor, with consideration for wind direction and spacing, for example. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Parts List
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 32 | a1ahna |
November 06, 2020 19:55
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. The SAS is a bare-bones air sensor, roughly modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). [notes:grid:SAS-build] This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Air Quality MonitoringThe Simple Air Sensor can be used: * to see immediate qualitative differences in air quality by displaying a realtime colored light readout. *to examine how the particulate sensor used in the closed source #PurpleAir responds to varying air conditions * to build familiarity with the electronic components used in air sensors without having to program * to use in groups (with 3+ sensors) to plan out placement of a #PurpleAir or other more expensive sensor, with consideration for wind direction and spacing, for example. Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir . Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Parts List
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 31 | a1ahna |
November 06, 2020 19:41
| about 4 years ago
The Simple Air Sensor is an arduino-based prototyping kit for studying air quality. [notes:grid:SAS-build] The Simple Air Sensor is a bare-bones air sensor modeled off of the Purple Air system. This sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two. It does not include a temperature, humidity and pressure sensor while the Purple Air does. Instead of logging results to the cloud or to the device itself, the Simple Air Sensor displays a red/yellow/green light that illustrates the PM2.5 levels it detects, but it does not convert these results into an Air Quality Index (AQI). This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and it comes pre-programmed. We also offer this kit assembled and ready to go, straight out of the box. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Air Quality MonitoringThe Simple Air Sensor can be used: * to see immediate qualitative differences in air quality by displaying a realtime colored light readout. *to examine how the particulate sensor used in the closed source #PurpleAir responds to varying air conditions * to build familiarity with the electronic components used in air sensors without having to program * to use in groups (with 3+ sensors) to plan out placement of a #PurpleAir or other more expensive sensor, with consideration for wind direction and spacing, for example Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] Design GoalsPublic Lab’s Simple Air Sensor is part of an effort to develop an open source project and community monitoring network that functions similarly to #PurpleAir. Our goal is to create an open-source repository of Purple Air user’s knowledge and expertise regarding installation and troubleshooting, while creating a space for Purple Air users to communicate their findings and organize with others within the air quality monitoring network. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. This project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a long term effort to encourage a culture of empiricism. Quite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
Parts List
|
Revert | |
| 30 | warren |
September 27, 2019 19:35
| about 5 years ago
The Simple Air Sensor is a prototyping and onboarding kit for study design around air sensing. It is also part of an effort to develop an open source project and community that functions similarly to #PurpleAir, so that, over time, people can transfer the expertise they've developed as #PurpleAir users regarding installation, organizing, communication, etc to an open source ecosystem. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. Uses
ContextThis project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a longterm effort to encourage a culture of empiricism. More about what's in the Simple Air SensorThis sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two; does not include a temperature, humidity and pressure sensor as the Purple Air does; and instead of logging either to the cloud or to the device itself, it displays a red/yellow/green light that illustrates the PM2.5 levels it detects without converting into an Air Quality Index (AQI). This project is part of an ecosystemQuite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and comes pre-programmed. We also offer it assembled and ready to plug in in the Public Lab Store. Parts List
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 29 | warren |
September 10, 2019 18:58
| over 5 years ago
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. This is a prototyping and onboarding kit for study design around air sensing. It is also part of an effort to develop an open source project and community that functions similarly to #PurpleAir, so that, over time, people can transfer the expertise they've developed as #PurpleAir users regarding installation, organizing, communication, etc to an open source ecosystem. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. Uses
ContextThis project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a longterm effort to encourage a culture of empiricism. More about what's in the Simple Air SensorThis sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two; does not include a temperature, humidity and pressure sensor as the Purple Air does; and instead of logging either to the cloud or to the device itself, it displays a red/yellow/green light that illustrates the PM2.5 levels it detects without converting into an Air Quality Index (AQI). This project is part of an ecosystemQuite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and comes pre-programmed. We also offer it assembled and ready to plug in in the Public Lab Store. Parts List
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 28 | warren |
September 05, 2019 21:02
| over 5 years ago
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. This is a prototyping and onboarding kit for study design around air sensing. It is also part of an effort to develop an open source project and community that functions similarly to #PurpleAir, so that, over time, people can transfer the expertise they've developed as #PurpleAir users regarding installation, organizing, communication, etc to an open source ecosystem. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. Uses
ContextThis project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a longterm effort to encourage a culture of empiricism. More about what's in the Simple Air SensorThis sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two; does not include a temperature, humidity and pressure sensor as the Purple Air does; and instead of logging either to the cloud or to the device itself, it displays a red/yellow/green light that illustrates the PM2.5 levels it detects without converting into an Air Quality Index (AQI). This project is part of an ecosystemQuite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and comes pre-programmed. We also offer it assembled and ready to plug in in the Public Lab Store. Parts List
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert | |
| 27 | liz |
July 30, 2019 19:10
| over 5 years ago
NOTE: The colored light displayed by this sensor is not related to the Air Quality Index (AQI) colors in any way. This is a prototyping and onboarding kit for study design around air sensing. It is also part of an effort to develop an open source project and community that functions similarly to #PurpleAir, so that, over time, people can transfer the expertise they've developed as #PurpleAir users regarding installation, organizing, communication, etc to an open source ecosystem. In this way, this kit offers an "offramp" from a corporately controlled, closed source project that lacks public forums for asking and answering questions, or for organizing and advocating around the data collected. Uses
ContextThis project emerged from observations that while many people share an understanding of the importance of "right to know" laws and of the purpose that transparency serves in a society, here is much less awareness of the fragility of technology, and the (inadvertent) gate-keeping role of expertise that leaves people without a pathway to "knowing how they know." This project is part of a longterm effort to encourage a culture of empiricism. More about what's in the Simple Air SensorThis sensor circuit uses the same type of particle detector as the #PurpleAir sensor, but only one as compared to #PurpleAir's two; does not include a temperature, humidity and pressure sensor as the Purple Air does; and instead of logging either to the cloud or to the device itself, it displays a red/yellow/green light that illustrates the PM2.5 levels it detects without converting into an Air Quality Index (AQI). This project is part of an ecosystemQuite a few people have built simple open source, Arduino-based devices around the cheap #plantower particulate air sensor datasheet, see:
This is a version that is easy to assemble (no soldering, just push wires into a breadboard), and comes pre-programmed. We also offer it assembled and ready to plug in in the Public Lab Store. Parts List
Activities[notes:grid:activity:simple-air-sensor] Add an activity or request an activity guide you don't see listed Questions[questions:simple-air-sensor] |
Revert |