Public Lab Wiki documentation



DIY Indoor Air Quality Remediation Kit

This is a revision from November 07, 2014 21:31. View all revisions
5 | 52 | | #11323

Gently separate (we're using mother-in-law's tongue) plants, remove dirt from plants

test air flow w/ flow meter each configuration before placing in the pot- 0.65 liters per minute (discard-a-stone coarse bubble), 0.7 liters per minute (aqua mist 1 cm), 0.65 liters per minute (aqua mist 5 cm x 14 cm)

epoxy to fill in the holes of the plastic pot that we're using (BE SURE TO THOROUGHLY SEAL HOLES), use one of the existing holes to run the tube through the pot

to reverse the motor remove diaphragm from the pump and reverse it- vacuum bingo! (GIF LOCATION)