This is a testing site only. See the live Public Lab site here »


Thermal Flashlight
upgrade:thermal-flashlight

A "Thermal Flashlight" is a DIY device which lets you do a kind of "light painting" -- [thermal photography](/wiki/thermal-photography). It produces a colored "heat map" overlaid directly onto a photo of a room. This is the simplest, cheapest, and to date, most effective way we have developed of measuring heat leaks or cool leaks indoors and outdoors. Simply put, the "flashlight" puts out redder light if it's pointed at something hot (default 75 deg F or more) and bluer light if it's pointed at something cold *(default 60 deg F or less). ### Parts The Melexis MLX90614 digital thermometer used in this kit can be found in a few places, at different price points: * [Adafruit.com](https://www.adafruit.com/product/1747) * [AliBaba.com](https://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText=Melexis+MLX90614+3V&viewtype=) ### Assembly There are a few versions of the thermal flashlight: [notes:grid:activity:thermal-flashlight-assembly] ### Questions [questions:thermal-flashlight] **** ### Activities [activities:thermal-flashlight] **** ### Using a Thermal Flashlight To capture the light painting over time, we have been using timelapse photography or this [p5js.org sketch](https://editor.p5js.org/jywarren/present/dl7B2Upp-) ([source](https://editor.p5js.org/jywarren/sketches/dl7B2Upp-)) (or its inspiration, GlowDoodle), as seen in the top image on this page. * Within view of the camera or laptop, sweep the flashlight beam over the scene at a distance of about 12 inches. * Try to stay out of the way of the beam, and don't point it directly at the camera or it will create a "starburst" and may mess up your image. * It's helpful to wear dark clothing so you don't show up in the image as you're moving around. ### Building your own **Parts list** For a Thermal Flashlight with 3.6 V Melexis Sensor and Common Anode LED. * 1 [Melexis MLX90614](http://www.futureelectronics.com/en/technologies/semiconductors/analog/sensors/temperature/Pages/6314181-MLX90614ESF-DAA.aspx) non-contact IR thermometer (3v). Data sheet: http://www1.futureelectronics.com/doc/MELEXIS/MLX90614ESF-DAA.pdf * 1 [common-anode RGB LED](http://www.sparkfun.com/products/10820) * 2 4.7k Ohm resistors * 2 100 Ohm resistors * 1 180 Ohm resistor * 1 0.1 μF capacitor * wire * [a breadboard](http://www.sparkfun.com/products/7916) or circuit board & soldering eqmt. * [Arduino](http://arduino.cc) * 9v battery and holder **Software** thermal-flashlight.zip Gist: https://gist.github.com/sdosemagen/1739961/ _Note: The goal of this file is to be a place to download everything without pursuing other links. If there are changes or updates please feel free to add and re-upload. If the file is missing anything, please comment below. You might notice that this is for the 5v Melexis, but it will work for either without issues. Alternative variations of the Flashlight can be made with a 5.5V Melexis Sensor and Common Cathode LED. For the 5.5 V sensor follow this diagram: http://publiclaboratory.org/notes/sara/2-7-2012/circuit-diagram-5v-melexis-sensor For the common cathode circuit board follow this diagram: http://publiclaboratory.org/notes/warren/2-11-2012/common-cathode-variant-thermal-flashlight-code Links to purchasing equipment: ### Consumable Parts * LEDs (1 per flashlight, but they sell as a pack of 25): http://www.sparkfun.com/products/10818 * Arduino Uno (1 per flashlight): http://www.sparkfun.com/products/11021 * Capicator (1 per flashlight): http://www.sparkfun.com/products/8375 * Resistor pack (this pack has a 180 ohm resistor which we found other packs not to have): http://www.eio.com/p-19326-velleman-kres-e12-pack-of-610-e12-series-resistors.aspx * 3.6 V infra red thermometer (1 per flashlight): http://www.futureelectronics.com/en/technologies/semiconductors/analog/sensors/temperature/Pages/6314181-MLX90614ESF-DAA.aspx. Data sheet: http://www1.futureelectronics.com/doc/MELEXIS/MLX90614ESF-DAA.pdf If you are starting an electronics kit from scratch: * a 40Watt soldering Iron (if you want it to be permanent otherwise duct tape or Velcro works temporarily) * hookup wire (solid not stranded- 22 or 24 gauge, you can get this at Radio Shack) * pliers called "wire strippers" to get the plastic wrap off the hookup wire (can get at Radio Shack) * solder for 40Watt iron, lead-free. * a breadboard (1 per flashlight). If you aren't soldering: http://www.adafruit.com/products/64. If you are soldering: https://www.adafruit.com/products/571. * a USB cable to connect the arduino to the computer via USB for power 5Volts (can get at Radio Shack) * household sponge for cleaning solder off tip * 9 volt battery with connector wires (can get at Radio Shack- 1 per flashlight) ***Cost: ~$40-$60*** **** ### Updates All research on PublicLab.org about the thermal flashlight project: [notes:thermal-flashlight] **** Several meetups have been organized to build and test thermal flashlights, at RISD (Providence, RI) and in Brooklyn, NY. We are organizing one now in Somerville, MA: * [Thermal Flashlight workshop](/wiki/thermal-flashlight-workshop) * [May 26 AS220 workshop](http://publiclab.org/wiki/may-26th-as220-thermal-flashlight-workshop) * [Thermal Fishing Bob presentation from NE barnraising](http://publiclab.org/notes/Kaya9804/06-09-2014/thermal-fishing-bob-presentation-from-the-ne-barnraising) ## Thermal flashlight heatmaps **** ## Custom thermal flashlight circuit boards Instead of building off of an #Arduino, it's possible to make a Thermal Flashlight using a custom circuit board. The circuit board files can be found here: https://github.com/Pioneer-Valley-Open-Science/thermal-flashlight ##Photos [![IMG_0779.JPG](https://i.publiclab.org/system/images/photos/000/003/132/medium/IMG_0779.JPG)](https://i.publiclab.org/system/images/photos/000/003/132/original/IMG_0779.JPG) [![IMG_0781.JPG](https://i.publiclab.org/system/images/photos/000/003/133/medium/IMG_0781.JPG)](https://i.publiclab.org/system/images/photos/000/003/133/original/IMG_0781.JPG) ...


Author Comment Last activity Moderation
cfastie "This is great progress. Have you found a place to buy the ZyTemp sensor? I am in Vermont and needed an array of these last night when I froze some ..." | Read more » over 8 years ago
warren "So i think those are the SDA/SCL pins marked here: I'm reading on a pinout diagram of the Arduino Uno that A4 = SDA and A5 = SCL, so here's a cr..." | Read more » over 8 years ago
warren "Leif sez: On the leonardo the I2C pins have separate pinouts on the board above the D13 connector. The visualight board exposes the I2C pins next ..." | Read more » over 8 years ago
warren "They've shipped! Anyhow, I need to ask Leif where to connect the Melexis; on an Arduino Uno you can use the Analog 4 and 5 (as shown here: http://..." | Read more » over 8 years ago
warren "this wasn't the complete thing, just the stuffed boards, which Leif handed to me at the Barnraising. " | Read more » over 8 years ago
mathew "Leif's awesome, but I didn't get my visualight yet. I NEED. Where did you get this one? " | Read more » over 8 years ago
mathew "thanks for working on this Nadya. I added a sketch on packaging and calibration that would be great to integrate with this design here: http://pub..." | Read more » about 10 years ago
nadya "well I wrote a tutorial about milling boards once, most of it is still up here: http://fab.cba.mit.edu/content/processes/PCB/modela2.html however I..." | Read more » about 10 years ago
sara "awesome i just sent an email to the Plots providence group to see if anyone is interested in trying their hand at it. Would you be interested in ad..." | Read more » about 10 years ago
nadya "you certainly can! their modela is underused anyhow. any of the fab gurus can help mill the board. " | Read more » about 10 years ago
sara "Thanks Nadya! exciting stuff--can it be made in a Fab Lab? We could give a shot in providence? " | Read more » about 10 years ago
warren "Hooray! I opened the files in Eagle and exported a few things which may be useful: Partlist Exported from thermal.sch at 6/4/12 8:18 PM EAGLE V..." | Read more » about 10 years ago