This is a testing site only. See the live Public Lab site here »


sourcing
sourcing


Author Comment Last activity Moderation
sachinjangra553 "Get sarkari result updates on welljob.in " | Read more » almost 3 years ago
SuziT9 "Hi, Bronwen -- Thanks for your post. I was doing similar math, but somehow it still didn't work! We were trying to lift a camera of only about 70 g..." | Read more » almost 3 years ago
Bronwen "I look at this webpage ALL THE TIME: https://www.balloons.com/HeliumWeightChart.pdf According to this chart, a regular 11" balloon will lift abou..." | Read more » almost 3 years ago
warren "My other thought is to look at what @oscar-brett has done to design a communal activity around using lots of party balloons: https://publiclab.org..." | Read more » almost 3 years ago
warren "My first thought on this is that the volume of a sphere grows much faster (it's 3 dimensions, so cubed!) than just adding more balloons (which is j..." | Read more » almost 3 years ago
warren "Thanks! I've made a chart where we could mark them for "good" and "bad" and add other notes; I hope it's roughly correct: But if it's not, it's ..." | Read more » about 3 years ago
maxliboiron " We tend to reuse bottles rather than source virgin ones, since there are so many in the waste/recycling stream. For kits, I would have people find..." | Read more » about 3 years ago
asnow " Compiling ideas we have so far here: https://www.bottlestore.com/plastic-containers/plastic-jugs.html https://www.usplastic.com/catalog/item.asp..." | Read more » about 3 years ago
bsugar "Follow up: I think the issue will be the extent to which you want it to be more durable vs. easy to cut (referring to the one where the square shap..." | Read more » about 3 years ago
bsugar "I wouldn't normally answer a question like this but I just had to see what #babylegs were and what it was that would require them. Now I'm in too ..." | Read more » about 3 years ago
thuynguyen454 "Very informative post. Thanks for sharing. Your blog is very interesting, if you are interested in the topic of the game please refer here: duck li..." | Read more » almost 4 years ago
warren "@partsandcrafts @kgradow1 @wmacfarl @bmela check it out! " | Read more » about 4 years ago
warren "I think it will work! It doesn't seem like the width of the stage is that important. " | Read more » about 4 years ago
j-bower "Yes, for sure. I need to double check on the plywood I have lying around - pretty sure it’s 1/4 inch. There’s also lots of scrap. I noticed you lis..." | Read more » about 4 years ago
warren "We've ended up trying a webcam as an easier starting point, later upgradable to Raspberry Pi camera. It's working really well! And these laser-cutt..." | Read more » about 4 years ago
warren "I heard you also have a lasercutter? These new files for the stage can be cut pretty easily by hand or by lasercutter -- would you be able to send ..." | Read more » about 4 years ago
Glenn "The Kite Workshop Handbook is available on amazon.com. It has detailed plans for building inexpensive workshop kites with a group: https://www.amaz..." | Read more » about 4 years ago
j-bower "Of course! Thanks for the link, and thanks Richard! " | Read more » about 4 years ago
warren "@j-bower, thanks for offering to help print these! " | Read more » about 4 years ago
warren "@j-bower -- Richard Bowman has taken a stab at a combined lens mount for v1 and v2 cameras! https://github.com/rwb27/openflexure_microscope/issues/..." | Read more » about 4 years ago
stevie "ohh interesting. I was about to buy the 10x. Any fixes for this? or any troubleshooting success @kgradow1 ? " | Read more » about 4 years ago
richardbowman "@kgradow1 are you using one of the openflexure optics modules? If so, that might explain why the 10x lens didn't work as expected. Finite-conjuga..." | Read more » about 4 years ago
richardbowman "Hey, for the Openflexure Microscope I tend to buy the lenses from Aliexpress, usually Sunlight Optical but there are many suppliers. The mass-prod..." | Read more » about 4 years ago
cfastie "If that model is modified to allow for the components and the ribbon, it should be done so the new underside surfaces are not horizontal. FDM print..." | Read more » about 4 years ago