Question: Question: IR filter in the camera

Ripingill is asking a question about spectrometry
Follow this topic

by Ripingill | March 21, 2015 20:12 | #11710

Can the IR filter in the camera of the desktop spectrometry kit 3.0 be removed for IR analysis?


There shouldn't be a filter in the spec v3 kit -- we've had the factory remove them. So it shouldn't be necessary!

Reply to this comment...

the IR sensitivity is quite poor. The filter though is very easy to remove. unscrew the lens.

Reply to this comment...

@warren Received my version 3.0 kit yesterday and also found there was an IR filter present (although easily removed).

Reply to this comment...

Hmm, what did it look like? Can you take a photo, if you still have it? We should talk to the factory if this is the case. Thanks!

Is this a question? Click here to post it to the Questions page.

Reply to this comment...

@warren Here's a photo. I'm pretty sure it is an IR filter as sensitivity in the NIR increased after I removed it. It was located at the bottom of the lens assembly.


Reply to this comment...

I'm sorry, correction - I chatted with the Kits initiative team and as of the v3.0 spectrometer, filters ARE still present in the cameras, so as to give folks an option, and because for some uses, visible-range spectra are better when the filter remains. For example, the Oil Testing Kit uses only visible-range data, and the filter keeps the noise down in that case.

Apologies for the misinformation! That is definitely the filter. Thanks for helping us solve this little mystery!

Reply to this comment...

Log in to comment