Public Lab is an open community which collaboratively develops accessible, open source, Do-It-Yourself technologies for investigating local environmental health and justice issues.
close | All topics »
If you cannot use the ReCaptcha to verify you are not a bot, use this alternative verification.
By signing up, you agree to the Code of Conduct, which applies to all online and in-person spaces managed by the Public Lab community and non-profit. You also agree to our Privacy Policy.
As an open source community, we believe in open licensing of content so that other members of the community can leverage your work legally -- with attribution, of course. By joining the Public Lab site, you agree to release the content you post here under a Creative Commons Attribution Sharealike license, and the hardware designs you post under the CERN Open Hardware License 1.1 (full text). This has the added benefit that others must share their improvements in turn with you.
or sign up to join the Public Lab community
Forgot your password? Reset it here
by gagan6730 | July 24, 2019 04:57 | #20253
Hi! I think you may need to run yarn install -- you can find more on this here!
yarn install
https://github.com/publiclab/plots2/issues/3840
Thanks warren , it worked. the command "yarn install" was not working properly as it had some conflicts. Now it works. Appreciate your help.
Reply to this comment...
Log in to comment
This is part of:
201 following
plots2:setup
Hi! I think you may need to run
yarn install-- you can find more on this here!https://github.com/publiclab/plots2/issues/3840
Thanks warren , it worked. the command "yarn install" was not working properly as it had some conflicts. Now it works. Appreciate your help.
Reply to this comment...
Log in to comment