Public Lab Wiki documentation


Thermal Fishing Bob Barnraising!!

This is a revision from October 06, 2013 21:59. View all revisions
3 | 11 | | #9406

We worked on a version of thermal fishing bob described here:

http://publiclab.org/wiki/thermal-fishing-bob

We found there were problems with the circuit diagram shown in this wiki page.

This version uses a 10K Thermistor from Ada Fruit:

http://www.adafruit.com/products/372 It comes with a 1% 10K resistor which you can use as calibration or for a resistor divider

Additional parts: * 1 common-anode RGB LED * wire * a breadboard or circuit board & soldering eqmt. * Arduino * 9v battery and holder

Thermal_Fishing_Bob.jpg

Share

Public Lab is open for anyone and will always be free. By signing up you'll join a diverse group of community researchers and tap into a lot of grassroots expertise.

Sign up