Public Lab Wiki documentation

Electronic Hydrogen Sulfide Sensors

This is a revision from January 08, 2018 20:20. View all revisions
7 | 63 | | #568

« Back to Hydrogen Sulfide

This page collects information about using electronic sensors for detecting hydrogen sulfide.

For information on the DIY photo paper method, see:

Arduino-based sensor prototype

Our first prototype used a digital sensor for hydrogen sulfide connected to an #arduino. Advantages of this system is that data from the sensor could be logged over time and that tool is reusable and portable. However the Figaro TGS 825 sensor itself is relatively expensive--approximately $60 for an individual sensor and $40 in bulk.


Arduino and Industrial H2S Sensor

More information on the digital sensor:

Prototype H2S Sensor

Temperature and Humidity Sensors to Correct H2S

Arduino + Figaro Hydrogen Sulfide Sensor

Arduino Patch for Detecting Hydrogen Sulfide

Hydrogen Sulfide Detection for Fart Detector