Comments

Author Comment Last activity Moderation
flatCat "@peter2975 I would not recommend using PLA filament... You can refer to the '3D Printed Part Guidlines' on the hackaday page at https://hackaday.i..." | Read more » over 8 years ago
flatCat "@peter2975 - I would imagine sheet metal would be exceedingly difficult to work in these dimensions and retain the accuracy required.. Having said ..." | Read more » almost 9 years ago
flatCat "@HoshiChemist Hi, thanks..! If you're building according to the current design without any mods, it'll probably cost you around that.. Depending ..." | Read more » about 9 years ago
flatCat "Hi Peter... The 'retired' directory contains the older version that I started with.. The 3d printable folder is the current version that you see ..." | Read more » over 9 years ago
flatCat "No need to be sorry! I hope I helped... Also, if you are building the ramanPi using the schematics/boards I designed....don't forget to swap the ..." | Read more » over 9 years ago
flatCat "Hi Peter... Perhaps try emailing me directly... Your diagram above depicts the Nucleo's USB plugged into the HDMI of the raspberryPi B+... I'll go..." | Read more » over 9 years ago
flatCat "Hi Peter... The main block diagram, shows it.. and some of the project logs indicate it.. and I suppose I could have indicated it better... but th..." | Read more » over 9 years ago
flatCat "Hi Peter... All of the information and documentation is located on the Hackaday.io website... http://hackaday.io/project/1279 You can also find ..." | Read more » over 9 years ago
flatCat "@imrehg Hi, thanks! This is actually my first project using a 3D printer... Looks like you guys are doing some pretty cool things there! I like ..." | Read more » over 9 years ago
flatCat "Thank you! I will have to take a look at that article.. It sounds interesting..Thank you for sharing that..! I just looked at http://www.alcottch..." | Read more » over 9 years ago
flatCat "@Kentells - I haven't quite finished yet... But I started in late June...I would hate to even think how many hours I've spent on this so far.. Let..." | Read more » over 9 years ago
flatCat "Thank you Matthew! I'm glad you appreciate it! I'm having a great time creating this thing.. If CSV data can be imported, then that should be a ..." | Read more » over 9 years ago
flatCat "And as promised, here are a couple shots of the spectrometer progress... " | Read more » over 9 years ago
flatCat "Hi Matthew.. I don't see why not... It might take a slight adaptation, one that I had already considered doing anyway... using the raspiCam instea..." | Read more » over 9 years ago
flatCat "Thanks Warren! I'm finishing up the spectrometer parts today! I'll post some pics when I finish printing them... " | Read more » over 9 years ago
flatCat "Thanks..! I'm actually using two razor blades screwed into the print... I tried printing them previously, with mixed results... The blades seem t..." | Read more » over 9 years ago
flatCat "Very nice..! I threw something similar together last night actually.. As a test stand for the optics I'm using to build my raman spectrometer... ..." | Read more » over 9 years ago