Comments

Author Comment Last activity Moderation
cedarlodge "@lach_myers You are correct, the interface needs to be displayed through the HDMI lead. Currently the code is still in development so it does need ..." | Read more » almost 6 years ago
cedarlodge "Not yet, It's my half term break in about two week so I can get back onto it around then. " | Read more » almost 6 years ago
cedarlodge "The camera I ended up using was the camera for pi zero with infra-red filter (https://shop.pimoroni.com/products/raspberry-pi-zero-camera-module). ..." | Read more » almost 6 years ago
cedarlodge "I went back and forth between the two cameras. In the end I went for the standard but slightly regretting it now. Is there any data on the addition..." | Read more » about 6 years ago
cedarlodge "It would use the USB port. The zero is wired to draw power through it as well as data. I've just enabled it on the Pi zero i'm using at work. You ..." | Read more » about 6 years ago
cedarlodge "Have got it to work before in a pi zero (no WiFi). Key thing is to make sure the micro usb you use is also a data cable. That’s one very frustratin..." | Read more » about 6 years ago
cedarlodge "Here’s a basic guide to adding a tactile button to the GPIO pins: https://www.modmypi.com/blog/tutorial-tactile-switch For a neater package, i’d ..." | Read more » about 6 years ago