This is a testing site only. See the live Public Lab site here »

Public Lab Research note


How to test a water sheen to tell if it is bacterial or petroleum

by stevie | January 24, 2020 19:20 24 Jan 19:20 | #22397 | #22397

Purpose

Bacterial sheens on water can often look like oil. However, they are completely harmless and natural. Below is a simple activity you can do when you come across a sheen to help you identify what it is. Petroleum (oil or gas) sheens and spills need to be reported, the bacteria ones do not.

Materials needed

  • A rock or a stick

Step 1

If you come across a sheen in the water observe it.

Step 2

Use a stick or a rock to poke a hole in the sheen. In a bacterial sheen, "the sheen will typically break into small platelets. In contrast, a petroleum sheen will quickly try to reform after any disturbance."

Step 3

If you were unable to determine the nature of the sheen from the test above, stand close to the sheen if you can without touching it and waft the air above it towards your nose. If it smells of oil or gas, it's likely a petroleum product that needs to be reported, if it doesn't smell, it's likely a natural bacterial sheen.

Step 4

If you've found that the sheen is potentially oil from the tests above it needs to be reported. To report a release or spill, contact the federal government's centralized reporting center, the National Response Center (NRC), at 1-800-424-8802.


Further resources:

Here is a post form the Minnesota Pollution Control Agency on this: https://www.pca.state.mn.us/sites/default/files/c-er4-07.pdf


I did this Help out by offering feedback!


People who did this (0)

None yet. Be the first to post one!


0 Comments

Login to comment.