Public Lab Research note

small Ac generator using a single neodymium sphere

by sciencetoolbar | August 23, 2017 12:23 23 Aug 12:23 | #14777 | #14777

small AC generator 230 V using a single neodymium sphere 13 mm ( rotor), a coil without core (stator) from a 230 V syncronous motor ( A4 laminators or microwaves turntable motor), a 3 V DC motor (inside electric car toys), and a battery.

Tested led bulbs 230 V 3 W - 9 W all our tests

1. 3V Dc motor -- inside toys which using two batteries 1.5 V AA

2. coil without core inside syncronous motor 230 V -- A4 laminators, microwave turntable motor - remove the core inside the motor

3. neodymium magnet sphere 13 mm

4. neodymium screw pot metal case 13 mm -- remove neodymium magnet from the metal case -- simple generator component

5. plastic connector used to fix screw pot metal case -- dc motor ax inside car toys -- heat the crew pot metal case to fix the plastic connector -- simple generator component plastic connector used to fix the screw por metal case to dc motor ax

6. plastic and metal components from mechanical construction kit -- used to build the holder for dc motor and coil -- simple generator holder construction kit

7. 3.7 V battery 600 mAh - minidrone or a related battery 3,7 V rechargeable battery

8. 230 V - led bulbs 230 V E 27 3 W - 9 W

9. power switch + wires


I dissected the information and I discovered them exceptionally valuable. There are some differences, for instance, the attractive catch I utilized between the attractive shafts, which is not moving. This is the primary issue I found when I begin my task. It is difficult to settle a metal when all is said in done between the attractive posts the metal inclines toward N shaft or toward post, buy a dissertation uk just in the event that you utilize a screw pot metal case like I utilized it is easy to settle it in any spot on the Neodymium circle you wish.

Reply to this comment...

Login to comment.