Public Lab Research note

Hydrocarbon standard samples for kits

by gretchengehrke | February 04, 2015 22:15 04 Feb 22:15 | #11553 | #11553

Hi All,

We have some questions for prepping the Oil Testing Kits and testing spectrometers.

Question 1: To test the accuracy of prototype spectrometers, should we try to replicate the fluorescence spectra of a certified calibration standard kit? This kit covers a spectral region of 300 - 770 nm, and has spectral correction software with a detailed SOP. It is pricey though -- $675 for a handful of uses. It would be a prototype validation, not something to send out in kits for unknown sample comparisons.
Spectral Fluorescence Standard Kit: Click on the data sheet for the SOP:

Question 2: To determine the precision of our spectrometers and our ability to distinguish among different types of oils, should we include a series of neat products in spectrometer kits? Could we distinguish various grades of crude oil, motor oil, and animal/vegetable oil? Also, what is the grade of crude oil found in the Gulf of Mexico? What other regions (and their primary crude oils) are of interest to us? Note that in the list below, “heavy, medium, light” refer to API gravity (see explanation:

Initial thoughts: Raw Crude Oil Heavy -- Alberta Oil Sands (extra heavy) -- supplier? Medium -- Texas Raw Crude ( or ( Light -- Bakken Crude ( Bunker fuel (grade?) Marine diesel Petroleum motor oil Synthetic motor oil (polyalphaolephins) Fish oil

Is the list above sufficient? Are those materials relevant? What other oils should we include? Where can we get a consistent supply of these materials to distribute with kits?


This is my first post, so i will make this brief. I am a Petroleum Geology student with acces to most of the world's oil crude's (brent, hanifa etc etc). I would like help if possible.

Reply to this comment...

SyncPoint, that is great to hear! Do you have supplies through specific vendors?

Is this a question? Click here to post it to the Questions page.

Reply to this comment...

I've been wondering about mailing these oil samples. Motor oil is fine, becuase its flash point is high. most "neat," or consumer commercial products, are OK.

I wonder how we get/prove we have info compliant with USPS regulations?

from: Publication 52 - Hazardous, Restricted, and Perishable Mail > 3 Hazardous Materials > 34 Mailability by Hazard Class > 343 Flammable and Combustible Liquids(Hazard Class 3)


Is this a question? Click here to post it to the Questions page.

Reply to this comment...

@SyncPoint - we'd love to get some additional crude samples, or perhaps you could share spectra of them?

Is this a question? Click here to post it to the Questions page.

Reply to this comment...

Login to comment.