Public Lab Wiki documentation

Revisions for Makerbot machine logs

57	cfastie	February 11, 2015 14:58 \| almost 10 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ on loan Projects: Maintenance: SN______ on loan Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Parts and Crafts, Sommerville, MA Contact Katie and Will SN_____ Projects: Maintenance: . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Build hours: Initial build hours 12/2013: 11 build hours on 02/07/2014: 245 build hours on 08/18/2014: 640 build hours on 01/01/2015: 1000 build hours on 02/08/2015: 1200 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers Prototyping spectrometer Maintenance: tightened all hex bolts holding plywood frame together 12/2014 upgraded firmware to Makerbot v. 7.5 broken fan replaced 12/24/2013 new nozzles installed 01/04/2014 24v/5v regulator replaced 01/17/2014 Filament feed mechanism upgraded (all prints were failing) (MakerBot replacement parts for right extruder) 02/06/2014 Filament feed mechanism for left extruder printed and installed with MakerBot hardware 04/2014 Printed feet, spool holders, and LCD/keypad cover lubricated noisy fan in motherboard compartment with SuperLube 06/2014 Replaced x-axis motor cable (all prints were failing) 08/18/2014 x-axis idler pulley is lubricated every week with SuperLube. Installed new ball bearing x-axis idler pulley from Alm Gear ($18). 01/20/2015 Tightened all hex bolts holding plywood frame together. They were all loose again after 1000 hours of printing. 01/21/2015 Tightened both grub screws on all six pulleys. They all tightened, but I noticed no difference in performance. 01/29/2015 Removed the fan from the motherboard compartment. It is not needed for cooling (long story) and just makes noise. 02/11/2015 . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN 12328 Projects: 24v/5v regulator replaced 3/14 spool holders replaced indicator LEDs disconnected to prevent voltage damage to board by motors. Maintenance:	Revert
56	cfastie	February 11, 2015 14:39 \| almost 10 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ on loan Projects: Maintenance: SN______ on loan Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Parts and Crafts, Sommerville, MA Contact Katie and Will SN_____ Projects: Maintenance: . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Build hours: Initial build hours 12/2013: 11 build hours on 02/07/2014: 245 build hours on 08/18/2014: 640 build hours on 01/01/2015: 1000 build hours on 02/08/2015: 1200 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers Prototyping spectrometer Maintenance: tightened all hex bolts holding plywood frame together 12/2014 upgraded firmware to Makerbot v. 7.5 broken fan replaced 12/24/2013 new nozzles installed 01/04/2014 24v/5v regulator replaced 01/17/2014 Filament feed mechanism upgraded (all prints were failing) (MakerBot replacement parts for right extruder) 02/06/2014 Filament feed mechanism for left extruder printed and installed with MakerBot hardware 04/2014 Printed feet, spool holders, and LCD/keypad cover lubricated noisy fan in motherboard compartment with SuperLube 06/2014 Replaced x-axis motor cable (all prints were failing) 08/18/2014 x-axis idler pulley is lubricated every week with SuperLube. Installed new ball bearing x-axis idler pulley from Alm Gear ($18). 01/20/2015 Tightened all hex bolts holding plywood frame together. They were all loose again after 1000 hours of printing. 01/21/2015 Tightened both grub screws on all six pulleys. They all tightened, but I noticed no difference in performance. 01/29/2015 Removed the fan from the motherboard compartment. It is not needed for cooling (long story) and just makes noise. 02/11/2015 . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN 12328 Projects: 24v/5v regulator replaced 3/14 spool holders replaced indicator LEDs disconnected to prevent voltage damage to board by motors. Maintenance:	Revert
55	cfastie	January 22, 2015 05:00 \| almost 10 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ on loan Projects: Maintenance: SN______ on loan Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Parts and Crafts, Sommerville, MA Contact Katie and Will SN_____ Projects: Maintenance: . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Build hours: Initial build hours 12/2013: 11 build hours on 02/07/2014: 245 build hours on 08/18/2014: 640 build hours on 01/01/2015: 1000 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers Prototyping spectrometer Maintenance: tightened all hex bolts holding plywood frame together 12/2014 upgraded firmware to Makerbot v. 7.5 broken fan replaced 12/24/2013 new nozzles installed 01/04/2014 24v/5v regulator replaced 01/17/2014 Filament feed mechanism upgraded (all prints were failing) (MakerBot replacement parts for right extruder) 02/06/2014 Filament feed mechanism for left extruder printed and installed with MakerBot hardware 04/2014 Printed feet, spool holders, and LCD/keypad cover lubricated noisy fan with SuperLube 06/2014 Replaced x-axis motor cable (all prints were failing) 08/18/2014 x-axis idler pulley is lubricated every week with SuperLube. Installed new ball bearing x-axis idler pulley from Alm Gear ($18) 01/20/2015 Tightened all hex bolts holding plywood frame together. They were all loose again after 1000 hours of printing. 01/21/2015 . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN 12328 Projects: 24v/5v regulator replaced 3/14 spool holders replaced indicator LEDs disconnected to prevent voltage damage to board by motors. Maintenance:	Revert
54	cfastie	January 02, 2015 04:30 \| almost 10 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ on loan Projects: Maintenance: SN______ on loan Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Parts and Crafts, Sommerville, MA Contact Katie and Will SN_____ Projects: Maintenance: . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Build hours: Initial build hours 12/2013: 11 build hours on 02/07/2014: 245 build hours on 08/18/2014: 640 build hours on 01/01/2015: 1000 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers Prototyping spectrometer Maintenance: tightened all hex bolts holding plywood frame together 12/2014 upgraded firmware to Makerbot v. 7.5 broken fan replaced 12/24/2013 new nozzles installed 01/04/2014 24v/5v regulator replaced 01/17/2014 Filament feed mechanism upgraded (all prints were failing) (MakerBot replacement parts for right extruder) 02/06/2014 Filament feed mechanism for left extruder printed and installed with MakerBot hardware 04/2014 Printed feet, spool holders, and LCD/keypad cover lubricated noisy fan with SuperLube 06/2014 Replaced x-axis motor cable (all prints were failing) 08/18/2014 x-axis idler pulley is lubricated every week with SuperLube, purchased a new ball bearing pulley from Alm Gear, will install soon . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN 12328 Projects: 24v/5v regulator replaced 3/14 spool holders replaced indicator LEDs disconnected to prevent voltage damage to board by motors. Maintenance:	Revert
53	mathew	September 17, 2014 21:40 \| about 10 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 245 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN 12328 Projects: 24v/5v regulator replaced 3/14 spool holders replaced indicator LEDs disconnected to prevent voltage damage to board by motors. Maintenance:	Revert
52	cfastie	February 08, 2014 05:14 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 245 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert
51	cfastie	February 07, 2014 15:02 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert
50	cfastie	February 07, 2014 15:02 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert
49	cfastie	February 07, 2014 15:01 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert
48	cfastie	February 07, 2014 14:59 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert
47	cfastie	February 07, 2014 14:57 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: `- broken fan replaced 12/24/13 - new nozzles installed 01/04/14 - 24v/5v regulator replaced 01/17/14 - Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 - Printed feet, spool holders, and LCD/keypad cover` . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert
46	cfastie	February 07, 2014 14:30 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert
45	cfastie	February 07, 2014 14:29 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: `- Prototyping camera rigs for aerial mapping - Experimenting with producing camera rigs for sale to Public Lab mappers.` Maintenance: `- broken fan replaced 12/24/13 - new nozzles installed 01/04/14 - 24v/5v regulator replaced 01/17/14 - Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 - Printed feet, spool holders, and LCD/keypad cover` . - Public Lab retail fulfillment center, Portland, OR `- Contact: Mathew Lippincott - SN______ - Projects: - Maintenance:`	Revert
44	cfastie	February 07, 2014 14:28 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: `- Prototyping camera rigs for aerial mapping - Experimenting with producing camera rigs for sale to Public Lab mappers.` Maintenance: - broken fan replaced 12/24/13 - new nozzles installed 01/04/14 - 24v/5v regulator replaced 01/17/14 - Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 - Printed feet, spool holders, and LCD/keypad cover . - Public Lab retail fulfillment center, Portland, OR - Contact: Mathew Lippincott - SN______ - Projects: - Maintenance:	Revert
43	cfastie	February 07, 2014 14:27 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: - broken fan replaced 12/24/13 - new nozzles installed 01/04/14 - 24v/5v regulator replaced 01/17/14 - Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 - Printed feet, spool holders, and LCD/keypad cover . - Public Lab retail fulfillment center, Portland, OR - Contact: Mathew Lippincott - SN______ - Projects: - Maintenance:	Revert
42	cfastie	February 07, 2014 14:26 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: - broken fan replaced 12/24/13 - new nozzles installed 01/04/14 - 24v/5v regulator replaced 01/17/14 - Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 - Printed feet, spool holders, and LCD/keypad cover . - Public Lab retail fulfillment center, Portland, OR - Contact: Mathew Lippincott - SN______ - Projects: - Maintenance:	Revert
41	cfastie	February 07, 2014 14:26 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert
40	cfastie	February 07, 2014 14:24 \| almost 11 years ago The status of Public Lab's 10 MakerBot Replicators. Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA Contact: Shannon Dosemagen SN______ not operational Projects: Maintenance: SN______ not operational Projects: Maintenance: SN _____ not operational Projects: Maintenance: . Picayune, MS Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org SN______ Projects: Maintenance: Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers). Left extruder inoperable due to cable break that I just have not fixed yet. The 5 volt power upgrade has not been performed yet. . Geography Department, University of Kentucky Contact: Jessi Breen SN______ not operational Projects: Maintenance: . Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue Contact: Liz Barry SN_____ not operational Projects: Maintenance: . Public Lab office, Pirate Ship, Sommerville, MA Contact Dogi SN_____ Projects: Maintenance: Totally modded with live streaming RPi cam video . Hackrfarm/University of Massachusetts Contact: Ian Walls SN_______ Projects: Maintenance: . LEAFFEST HQ, Salisbury, VT Contact: Chris Fastie whose gmail is cfastie SN 11837 Initial build hours: 11, build hours on 02/07/14: 220 Projects: Prototyping camera rigs for aerial mapping Experimenting with producing camera rigs for sale to Public Lab mappers. Maintenance: broken fan replaced 12/24/13 new nozzles installed 01/04/14 24v/5v regulator replaced 01/17/14 Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14 Printed feet, spool holders, and LCD/keypad cover . Public Lab retail fulfillment center, Portland, OR Contact: Mathew Lippincott SN______ Projects: Maintenance:	Revert

« »

Comparing revision 57 with revision 56