The status of Public Lab's 10 MakerBot Replicators.

• Public Lab office, Propeller Workspace, 4035 Washington Ave, New Orleans, LA

  • Contact: Shannon Dosemagen

  • SN______ not operational

    • Projects:
    • Maintenance:
  • SN______ not operational
    • Projects:
    • Maintenance:
  • SN _____ not operational
    • Projects:
    • Maintenance:
      .

• Picayune, MS

  • Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org
  • SN______
  • Projects:
  • Maintenance:
    • Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers).
    • Left extruder inoperable due to cable break that I just have not fixed yet.
    • The 5 volt power upgrade has not been performed yet.
      .

• Geography Department, University of Kentucky

  • Contact: Jessi Breen
  • SN______ not operational
  • Projects:
  • Maintenance:
    .

• Public Lab office, Brooklyn, NY, Former Pfizer building, 630 Flushing Avenue

  • Contact: Liz Barry
  • SN_____ not operational
  • Projects:
  • Maintenance:
    .

• Public Lab office, Pirate Ship, Sommerville, MA

  • Contact Dogi
  • SN_____
  • Projects:
  • Maintenance:
    • Totally modded with live streaming RPi cam video
      .

• Hackrfarm/University of Massachusetts

  • Contact: Ian Walls
  • SN_______
  • Projects:
  • Maintenance:
    .

• LEAFFEST HQ, Salisbury, VT

  • Contact: Chris Fastie whose gmail is cfastie
  • SN 11837
  • Initial build hours: 11, build hours on 02/07/14: 245
  • Projects:
    • Prototyping camera rigs for aerial mapping
    • Experimenting with producing camera rigs for sale to Public Lab mappers.

  • Maintenance:

    • broken fan replaced 12/24/13
    • new nozzles installed 01/04/14
    • 24v/5v regulator replaced 01/17/14
    • Filament feed mechanism upgraded (MakerBot replacement parts) 02/06/14
    • Printed feet, spool holders, and LCD/keypad cover
      .

• Public Lab retail fulfillment center, Portland, OR

  • Contact: Mathew Lippincott
  • SN 12328
  • Projects:
• 24v/5v regulator replaced 3/14
• spool holders replaced

• indicator LEDs disconnected to prevent voltage damage to board by motors.

  • Maintenance: