This page will host instructions on assembling and using the **infrared/visible dual camera kit** as distributed through the [Balloon Mapping Kit Kickstarter project]().

This page is under construction but please get in touch on the mailing list if you want to collaborate on creating it.

###Steps###

* [Assemble the camera bracket](/wiki/t-bracket-dual-camera-rig)
  * Putting the T rig inside a big soda bottle for protection?
  * Attaching the timer/battery? This will evolve as soon as people try to use the rig.  It would be good to avoid damaging crashes by new users.
  * Use the camera strap as a safety tether.
* [Assemble the electronics](/wiki/dual-camera-kit-electronics)
  * Assembling the 555 timer circuit
  * Preparing USB cables
  * Preparing batteries and battery holders
* [Install and configure the software](/wiki/dual-camera-kit-software)
  * Choosing an SD card and loading the software
  * Configuring the camera menus
* [Test flight](/wiki/dual-camera-kit-test-flight)

Attached is the "introduction" document which shipped with each kit (also [editable in Google Docs](https://docs.google.com/document/d/1e1KjDyDtP8Ws3yteFOgraxhen-MEVXOL2dFsRdZNXZY/edit)). For help, please contact the mailing list -- either [register on Public Laboratory](/join) or email publiclaboratory@googlegroups.com.