We are really interested in measuring various water quality parameters that are relevant to environmental health in low-cost and accessible ways. A lot of people have been working on developing low-cost, open-source sensors for water chemistry and physical properties (see https://publiclab.org/wiki/open-water), and there are also several commercially available water sensors and analog tools that can measure relevant water quality parameters. Below is a table with some examples of tools for water quality parameters. Are there others you're interested in? Please add them to the list here and to the linked Google Doc! - flow rate - temperature - depth/pressure - Transparency - colorimetry - dissolved oxygen - temperature - ammonia/ammonium - oxidation-reduction potential - ORP - COD - Phosphate - conductivity/salinity - turbidity/TSS - pH - TDS - Hardness - Lead - COD - turbidity/TSS - nitrate - bacteria - Fluoride [prompt:text:ie temperature] Most of the sensors listed in the spreadsheet are probes that require you to physically be present at the body of water such that you can hold the probe in the water. A few others are sensors that can be deployed for longer periods of time without supervision, either with a remote data upload or an in-sensor data logger that can be retrieved every couple of weeks. The type of sensor -- a probe, a deployable sensor, or a tool requiring sample collection -- is listed in column C. If you have any interest in working on different components of these sorts of tools -- sensors, data loggers, or enclosures -- please [ask questions below](#Questions) or [share your work using the tag "water-sensors"](/post?tags=water-sensors) See and [edit the full spreadsheet here](https://docs.google.com/spreadsheets/d/1UwjRqU8kHTwEcnDdO2Zxkr8zkFkaGfyePJ-cdnxJzw0/edit?usp=sharing) ## Questions [questions:water-sensors] **** ### Analog methods Even though this wiki page is labeled "water sensors," the most accessible modes of measuring water quality parameters are often **analog, non-digital methods** where you directly observe water (e.g. using a secchi disk to assess turbidity) or collect a sample and test it with a visual method (e.g. color-change pH strips). Several analog tools are included in the spreadsheet, and please add more! ### Hybrid approaches and enclosures In some cases, it may be possible to couple a commercially available **probe** sensor with a DIY **data logger** (such as the Riffle, https://publiclab.org/riffle) and an water-tight **enclosure** to create a lower-cost deployable sensor. Deployable sensors can be extremely useful for long-term monitoring, monitoring in places that are difficult to access frequently, or to document fluctuations in water chemistry with greater temporal resolution.