A major change in Spectral Workbench 2.0 is a system called **Operations** (previously known as PowerTags). When you save a spectrum, you usually have to perform additional operations, sometimes [setting a cross section](#crossSection), certainly calibrati ng, and sometimes then smoothing or otherwise manipulating the data. But for various reasons, you often want to record and even revert some of those changes. Maybe you want to do them differently, or to recalibrate. Operations are the new way to do this. Each time you apply an Operation, the resulting dataset is saved in a [Snapshot](), so that a copy is archived and available in the database without having to run each calculation every time. Operations typically feature a `key:value` pair. Creating operations is easy; the Tools pane below each spectrum guides you through creating them with a simple form, and adds your Operation when you click Apply. Some Operations reference other spectra, for comparison or su btraction. You'll be presented with a menu and search form to find the right spectrum to use. Operations include: ####calibrate `calibrate:` - Copies calibration from spectrum with given . ####linearCalibration `linearCalibration:,` - Manually calibrated with two reference points and , which correspond to known positions 435.83 and 546.07, respectively. This should be the first operation, as it works best on sharp, full-width data that has no t been range-limited or smoothed. ####range `range:-` - Limits wavelength range to specified -, in nanometers, or if data is uncalibrated, then in pixels. ####smooth `smooth:` - Rolling average smoothing by given # of pixels. ####forked `forked:` - Spectrum is a forked copy of the Spectrum with given ####subtract `subtract:` - Subtracts spectrum with given from the current spectrum. Should point at a specific snapshot with syntax `subtract:#` ####crossSection `crossSection:` - Sets the row of pixels, counting pixels from top row, used to generate the graph. The default for any spectrum is the top row of pixels, the equivalent of `crossSection:0`, whereas `crossSection:20` would measure the brightness of each pixel in the 21st row down from the top (since we begin counting at 0). ####flip `flip` - Indicates that the spectrum image has been flipped horizontally. This can be necessary if your spectrometer webcam is installed backwards, which would place the red end of the spectrum (with higher wavelengths) to the left, instead of to the right, as is the standard in Spectral Workbench. `flip` is also copied over if a spectum marked with it is used as a calibration for another spectrum, with the `calibrate:` Operation, below. ####transform `transform:` - Filters this spectrum with a math , by running the brightness of each pixel through the math expression. More on this soon. ####blend `blend:` - Filters this spectrum with a math , like `transform:`, but in combination with data from a given second spectrum. This allows for, for example, multiplying or dividing two spectra. **** ##Passive Operations Some Operations don't affect the data at all; it's not clear if we're going to make these appear in the Tags listing instead. For now, these two are generated along with `calibrationQuality` and provide metadata about the spectrum, but aren't used to change the data: ####error `error:` - Scores a calibration 'fit' by comparison to a known reference; lower is better, zero is perfect. ####calibrationQuality `calibrationQuality:` - Roughly indicates how good a calibration 'fit' is, in qualitative terms `good` for <12, `medium` for <16 and `poor` for anything higher/worse. else response += ", which has no snapshots -- this is not recommended."; **** ##Contributing The Operations framework is designed to be flexible and extensible, as we add more abilities to Spectral Workbench. Please contact the [developers list](/wiki/developers) with ideas and suggestions for new features and future versions, and check out Spectral Workbench on Github at https://github.com/publiclab/spectral-workbench. Also check out our [Contributing to Public Lab Software page](/wiki/contributing-to-public-lab-software).