###List of parts
* 3 injection molded plastic (ABS) parts
* 2 short screws
* 2 long screws
* black paper liner
* diffraction grating
* protective film
* precision printed slit
* jewelers screwdriver
###Instructions
1. Carefully pull out the grating without getting dust or fingerprints on it, and lay it ...
2. Place the double-sided tape on the interior of the molded plastic parts as shown
3.
4. ...magic...
Sketchup model: smartphone-spec-overview.skp
##Mathew's Assembly Run##
* 3 injection molded plastic (ABS) parts
* 2 short screws
* 2 long screws
* 1 short black paper liner (5cm x 4cm)
* 1 long black paper liner (5cm x 8cm)
* 6 5cm lengths of double-sided tape
* 1 5cm black foam tape
* diffraction grating (5cm x 4.4cm)
*
###Adhesive options
Here's a list of other adhesives and tape strips which may be helpful in assembling and mounting the spectrometer. Some may be shipped in the kits:
* Tape strips are sold for costumes and wigs: http://www.amazon.com/Bonding-Double-Tape-Walker-Straight/dp/B00D7LA162/
* 3M's super strong 300LSE in letter sheets, ~$12 each: http://www.amazon.com/9474LE-super-strong-double-sided-adhesive-transfer/dp/B00CCGK31G/
* Scrapbooking tape strips: http://www.amazon.com/Double-sided-adhesive-mounts-12-pack/dp/B00D5WDZXO/ (hard to find but good size -- big lots available on ebay: http://www.ebay.com/itm/New-72-Packs-Scrapbook-Double-Sided-Adhesive-Strips-/321157403796 is 3600 strips for $65, or 2c per strip)