This page documents assembly and use of the Public Lab **Countertop Spectrometer** -- a pre-assembled, pre-calibrated spectrometer with a built-in dimmable light and stage, based on the [Desktop Spectrometry Kit](/wiki/dsk), which was offered as a reward during the [Public Lab DIY Spectrometry Kit Kickstarter](http://kickstarter.com/projects/jywarren/public-lab-diy-spectrometry-kit)

Although designs and ideas have evolved since the Countertop Spectrometer was developed, it is still a robust way to measure absorption in liquid samples. 

##Getting started

###Setup

Although the spectrometer is assembled when shipped, you need to attach the arm to the base (it is detached for shipping) and bolt on the sample stage. 

**Stage: ** The stage is the piece of clear acrylic plastic in your box (it has a brown paper protective cover which you can peel off). Place the stage between the two black plastic clips on the spectrometer's arm. Using a screwdriver and your fingers, insert and tighten the bolts through both clips and the stage's matching holes. 

**Do NOT place the stage too low or the light may melt or burn it if left on high!**

###Retrieving your calibration

If you ordered this in the above-mentioned Kickstarter, your spectrometer was pre-calibrated at the "factory". To retrieve the calibration and begin taking calibrated data, follow these steps: 

* First, register on this site, and log into [SpectralWorkbench.org](https://spectralworkbench.org) with your new username.
* Next, navigate to: https://spectralworkbench.org/lookup/
* Enter your calibration code, which is written on a round sticker on the bottom of your device.

Calibrations can potentially drift over time, but re-calibrating yourself is easy. You'll need a fluorescent light bulb, which you can put into your light socket (turn the dimmer all the way up). Then [follow instructions here](/wiki/spectral-workbench-usage#calibration).

For more on usage, troubleshooting, and support, check out these pages:

* [Spectral Workbench](/wiki/spectral-workbench)
* [Spectral Workbench Usage](/wiki/spectral-workbench-usage)