Assess Turbidity in Water
turbidity

As explained [in @donblair's primer](/notes/donblair/08-25-2015/turbidity-001), measuring turbidity means "measuring the amount of suspended solids in water -- solids that haven't fully dissolved". That is, "turbidity, an optical technique for assessing suspended solids in liquid -- is an important water quality parameter. Typically, light is shone into a liquid sample, and the amount of light scattered back out of the sample (off of particles suspended in it) is measured; the intensity of this scattered light is considered to be related to the amount of suspended solids in the sample." ([reference](/wiki/turbidity_sensing)) _image credit: https://castlebrookestreamstudy.weebly.com/_ This page needs help! * Info about regulations * Info about ecological or human health impacts * Advocacy leverage points * Constraints we're working within: cost, complexity, sensitivity, time There are a LOT of resources available on these pages by @donblair and others: * https://publiclab.org/notes/donblair/08-25-2015/turbidity-001 * https://publiclab.org/wiki/turbidity_sensing **** ## Questions [questions:turbidity] **** ## Sensors Here's a list of different turbidity sensors and measurement systems. See below for some Do-It-Yourself approaches to measuring turbidity, and [this page](https://publiclab.org/wiki/turbidity_sensing) for more information on how turbidity sensors works. * Kelley et al., An Affordable Open Source Turbidimeter http://www.mdpi.com/1424-8220/14/4/7142/pdf * Hackteria.org, Turbiduino: http://hackteria.org/wiki/DIY_turbidity_meters * Lambrou et al., A Nephelometric Turbidity System for Monitoring Residential Drinking Water Quality: http://www2.ucy.ac.cy/~faniseng/publications/SENSAPPEAL09.pdf - Fondriest review: http://www.fondriest.com/environmental-measurements/equipment/measuring-water-quality/turbidity-sensors-meters-and-methods/ - Hach overview: http://www.hach.com/asset-get.download-en.jsa?code=61798 (see [Water sensors](https://publiclab.org/wiki/water-sensors) for more, and [click here to add to this table](https://docs.google.com/spreadsheets/d/1UwjRqU8kHTwEcnDdO2Zxkr8zkFkaGfyePJ-cdnxJzw0/edit#gid=28737041)) **** ## Activities Activities for people to test methods (these develop over time) [activities:turbidity] **** ## Existing work [notes:turbidity] ...


Author Comment Last activity Moderation
warren "This can be a helpful way to get the same exposure for two samples at once, which can be important when using a less-controlled camera like a webca..." | Read more » almost 7 years ago
warren "Here's one attempt from a few years ago: https://publiclab.org/notes/cfastie/02-25-2014/mobile-cuvette-holder This was designed for a laser, but c..." | Read more » almost 7 years ago
programmer1200 "Yes it is possible to redesign it for two cuvette at one time would just need to widen the area toward the spectrometer and double the area on the ..." | Read more » almost 7 years ago
warren "Hi, @programmer1200 -- saw your post on a cuvette holder and wondered if it would be possible to use it for two cuvettes simultaneously? Perhaps by..." | Read more » almost 7 years ago
programmer1200 "Hi Warren I'm also working on a beers law based machine for testing one cuvette at a time and measuring the amount of light penetrating through the..." | Read more » almost 7 years ago
warren "I think the light is not evenly distributed, and in the scan I took, there's just more light in the middle. I'd like to correct for this but it's e..." | Read more » about 7 years ago
donblair "Hi @gretchengehrke! Sorry for the much-delayed reply :) and thanks for the comment. I, too, liked this approach -- basically, using the differenc..." | Read more » about 7 years ago
Mempet "Hi @gretchengehrke! Thanks for letting me know about this! I might actually be able to use it. However, one complication I have is the amount of li..." | Read more » about 7 years ago
gretchengehrke "Hi @Mempet, Could you use a turbidity tube like this one: https://www.carolina.com/environmental-science-water-quality/carolina-turbidity-tube-120-..." | Read more » about 7 years ago
gretchengehrke "@donblair, I was just reading this again, and am again impressed by your elegantly simple approach -- such a great idea! It seems like this alterna..." | Read more » over 7 years ago
gretchengehrke "@bhikman, that integrated optical filter is neat, and surprisingly inexpensive! If you do pick this back up, I am super interested in seeing how we..." | Read more » over 7 years ago
bhickman "Hi @gretchengehrke. I kinda let this project fall though the cracks. I did have the sensor working pretty well, the only issue was interference fro..." | Read more » over 7 years ago
gretchengehrke "Hi @bhickman and @ggallant! I was just reading this research note and comments again, and it sounds like such a promising project. Are there any up..." | Read more » over 7 years ago
gretchengehrke "That's so great, Shan! " | Read more » over 7 years ago
shanlter ""Did the Chinese government state the methods they would use to evaluate each of these parameters?" yes, they state the standard methods. "Also, di..." | Read more » over 7 years ago
shanlter "Hi @gretchengehrke, sorry for responding late, I was in a temple with no internet access in the passing week. Yes, I've seen that page and I though..." | Read more » over 7 years ago
gretchengehrke "@shanlter, this is great! Have you seen the spreadsheet on the www.publiclab.org/wiki/water-sensors page? There are some other options there listed..." | Read more » over 7 years ago
warren "Hi, Gretchen - do you have some examples of when and where this technique has been successfully used by folks? Thanks! " | Read more » over 7 years ago
jesseslone "@donblair I noticed you have a more recent post about turbidity, I was wondering if you would choose a different light sensor than the Adafruit one..." | Read more » about 8 years ago
eustatic "NOAA and Coast Guard made this guide "Job Aid" to observing oil slicks from the air. It's state of the art for government. OWJA 2012 Here's some ..." | Read more » about 8 years ago
gretchengehrke "@tonyc, @mathew, @warren, @stevie, @donblair: I think an additional stretch goal that would be worthwhile is to be able to control the trap cam wit..." | Read more » over 8 years ago
bhickman "Hi ggallant. Your design files look great! I'm going to have to look into openscad. As far as a server, I don't think publiclab has one. I think mo..." | Read more » over 8 years ago
ggallant "I parked the openscad design files at https://www.dropbox.com/sh/mzp8gketcuqufkq/AADkG_kmo2xcL3iWYOLi4YCxa?dl=0 If there is a better place, such a..." | Read more » over 8 years ago
bhickman "Hi ggallant. I'm definitely interested in what you have put together. I'll check out openscad to see what you have. As for the pipe and air bubble..." | Read more » over 8 years ago