gasfinder
gasfinder


Author Comment Last activity Moderation
warren "Via Annie on the main publiclaboratory list In case you have not heard back, check EarthWorks website for application for community group to reque..." | Read more » over 6 years ago
loganw "@stevie: The sensor is probably too noisy to actually work for methane. There's some further stuff that seems worth trying w/r/t noise reduction th..." | Read more » about 7 years ago
stevie "Hi! was hearing from a number of groups in CO this week about interest in low cost methane sensing. Any updates here? " | Read more » about 7 years ago
mathew "I'm also interested if the same lenses and filters could be applied to a Lepton sensor-- It's primary sensitivity is in the far infrared. It appea..." | Read more » over 7 years ago
mathew "I discovered the OpenMV project has a thermopile board. I can't find a lot of documentation on it, but I found this: https://openmv.io/docs/librar..." | Read more » over 7 years ago
loganw "Here's an update, I've received a sensor (uncalibrated, which turns out to be an issue) and read data off of it: http://exclav.es/2016/10/26/talkin..." | Read more » over 7 years ago
mathew "we don't have to frame the capabilities as a large leaks vs. small leaks question, I think it will be more about lighting conditions. The commerc..." | Read more » over 7 years ago
loganw "Cool! I was thinking about attaching a peltier cooler to it. I can't find much info on what that does to a thermopile sensor though, since they bas..." | Read more » over 7 years ago
mathew "I found this handy thermoelectric cooler module calculator: http://tetech.com/peltier-thermoelectric-cooler-module-calculator/ " | Read more » over 7 years ago
mathew "great to see these initial assumptions! and awesome work on finding both a low-cost sensor and a low-cost filter. The FLIR Lepton thermal images a..." | Read more » over 7 years ago
nshapiro "Here is some alternative tech to the FLIR-- hyperspectral camera for methane visualization (which is one of the most expensive gases to monitor). M..." | Read more » about 9 years ago
amysoyka "Here is the link to the full talk: https://www.youtube.com/watch?v=z7dfK5RfMTs " | Read more » over 9 years ago
amysoyka "You might appreciate what these guys did. http://youtu.be/yqB8w0WXhnc 1:45 - they built a portable lab to monitor gasses around fracking sites. " | Read more » over 9 years ago
mathew "Those lower wavelength bands may be cheaper or possibly not require as much cooling to get a fast sensor response. Good thinking. We need a ~100k..." | Read more » over 9 years ago
geraldmc "While methane has a main absorption band between 3200-3400nm, it also has weaker bands around 2300nm and 1650nm. For the 3200-3400nm band EOC sell..." | Read more » over 9 years ago
mathew "MWIR lenses: https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=5428 http://www.ispoptics.com/catalog/2/IR%20Lens%20Assemblies http://www..." | Read more » over 9 years ago
mathew "The key filter seems to be a 3.46micrometer peek bandpass filter for midwave (MWIR) infrared. a few groups seem sell them or something like it. h..." | Read more » over 9 years ago
mathew "InAs (Indium Arsenide) looks almost perfect, with a high sensitivity and a peak sensitivity at 3400nm (3.4micrometers) when cooled to 196K. 196K is..." | Read more » over 9 years ago
mathew "Finding a sensor that can do high-speed sampling in the range required is looking pretty expensive. Thor Labs has a series of amplified, cooled se..." | Read more » over 9 years ago
mathew "Can we digitize a 240x320 analog video signal using an standard audio jack? A mac laptop captures a maximum of two cannels (stereo) at 96khz, with..." | Read more » over 9 years ago
mathew "The mirror arrays are looking more and more attractive because of their light-efficiency and compactness. Also, since I can now order cast and hig..." | Read more » over 9 years ago