Comments

Author Comment Last activity Moderation
rmeister "Not sure what 5V pin you mean, but yes a 4-pin cable is need to connect to the microphone input of smartphones/mobile devices. " | Read more » about 7 years ago
rmeister "@donblair - Thanks Don, that demo looks awesome! Happy to see that WebJack is in use :) I gladly try to answer questions if there are any issues w..." | Read more » over 7 years ago
rmeister "According to the first review on Amazon the pinout of the cable is (from tip to sleeve): Left (white) Right (red) Video (yellow) Ground But as..." | Read more » over 7 years ago
rmeister "Right, that should be inlcuded in the readme. Yes, echoCancellation is disabled at quiet.js: https://github.com/quiet/quiet-js/blob/master/quiet.j..." | Read more » over 7 years ago
rmeister "Sure, but anything above 7kHz will need disabling echoCancellation. gh-pages is currently set up with 2450 and 4900 Hz, echoCancellation active. F..." | Read more » over 7 years ago
rmeister "@warren this is the tutorial for testing without Arduino :) Signal looks fine though. Remember to change the frequencies in SoftModem.h " | Read more » over 7 years ago
rmeister "That could work. But you will need an additional adapter for every device with AHJ pinout: https://www.headsetbuddy.com/3-5mm-ctia-to-omtp-smartpho..." | Read more » over 7 years ago
rmeister "Leonardo is again a different processor with different names for the timers used in the library. I think we can fix that with some #ifdef's in the ..." | Read more » over 7 years ago
rmeister "Cool, thanks for your effort! " | Read more » over 7 years ago
rmeister "If the nanite's output is 3V, then the voltage at your phone will be about 3V as well for the first few periods. But after a couple of periods the ..." | Read more » over 7 years ago
rmeister " For an (unequally) attenuated signal, the amplitudes for f_low and f_high are uneven. In this case, the amplitude for f_high is very low. Cool, ..." | Read more » over 7 years ago
rmeister "Oh yes, the signal is still attenuated. Didn't see that on my phone yesterday. " | Read more » over 7 years ago
rmeister "Cool, looks good. Thanks for your effort! Maybe try switching the wires to sleeve and ring2. " | Read more » over 7 years ago
rmeister "Probably you ment an other circuit, as I see you have a background in electronics engineering :D " | Read more » over 7 years ago
rmeister "It's a voltage divider (so your phone won't be damaged by a too large voltage) and a high-pass filter (removes DC voltage). Would you give it a tr..." | Read more » over 7 years ago
rmeister "Wow, thanks @kinasmith! Probably this pulses are sort of a presence detection for the microphone? Could be an issue, but most of the signals from ..." | Read more » over 7 years ago
rmeister "A friend of mine just tested the demo site of the FSK generator with his iPhone (ios9.3.3). The script does not seem to work anymore :( " | Read more » over 7 years ago
rmeister "Hi @dusjagr, thanks for that hint! Found a Safari compatible version of the FSK generator in your link section. At least sending data to the µC sho..." | Read more » over 7 years ago
rmeister "Hi Liz, thanks for your feedback! You can click on the photo to get a larger version. There the connections are visible more clearly. I'll see if I..." | Read more » over 7 years ago
rmeister "Oh, maybe I should add a note for iPhone and Mac users. According to this site, Safari does not support WebRTC yet: http://iswebrtcreadyyet.com/ " | Read more » over 7 years ago
rmeister "Is there somewhere a link without https? " | Read more » over 7 years ago
rmeister "Cool, thanks for your results! Chrome Android → Chrome Android did work for me, but not very well. Sometimes I had to repeat sending like 10 times..." | Read more » over 7 years ago