Comments

Author Comment Last activity Moderation
pablo "The files at https://github.com/publiclab/spectrometer3/blob/master/spec3-pdf.zip when opened in inkscape gives the correct size. " | Read more » over 7 years ago
pablo "Reviewing the original .svg files I see they have the size in pixels defined, not in inches or cm. So it makes the standard conversion. Before ver..." | Read more » over 7 years ago
pablo "Mmmm, weird! The one I lasercut is 23.5cm long, as it should. I just measured it. However, all the files I am looking now in inkscape (the ones I ..." | Read more » over 7 years ago
pablo "Hey @warren, I made a test and it does fit in a 12x24 inches board. See my file: lasercut-spectrometer-3.0-12x24.svg Note, funny for my to talk i..." | Read more » over 7 years ago
pablo "I had posted the .ai file I used to cut, and I've just uploaded the original .svg, as I am not able to open that .ai (check the research note https..." | Read more » over 7 years ago
pablo "I've changed the bulb and used a less powerful one and I got good results: https://spectralworkbench.org/spectrums/91741 without the blue noise. W..." | Read more » over 7 years ago
pablo "Hi! I've followed all the recommendations (except refocus) but the blue hump is still there: https://publiclab.org/notes/pablo/11-09-2016/how-to-do..." | Read more » over 7 years ago
pablo "I've focuses to 22cm, removed blue LED: https://spectralworkbench.org/spectrums/91509 The blue hump is still there. I'll try to change the DVD to ..." | Read more » over 7 years ago
pablo "Thanks @stoft and @warren. I've left the DVD as it was in spectrometer v2.0 (test: https://spectralworkbench.org/spectrums/91439) and it works. No..." | Read more » over 7 years ago
pablo "Thaks, Jeff. I'll try to use a wooden block with a hole in it, or made with pieces to allow the cable to pass. I'll keep distance and height from t..." | Read more » over 7 years ago