Comments

Author Comment Last activity Moderation
cfastie "Ah, I see. Those keywords, DATE and TIME, refer to the time the sketch was compiled and are saved on the Arduino until a new sketch is loaded. Tha..." | Read more » over 2 years ago
cfastie "That would be terrific if a ferrite bead eliminated the noise I was seeing. My impression was that the bead was protection against radio frequency ..." | Read more » over 2 years ago
cfastie "Thanks Ed, It's good to know there is hope for the Nano. That's an excellent thread you linked to. I might try removing the LED resistor and the r..." | Read more » over 2 years ago
cfastie "Xose, Thanks for pointing to those Grove I2C hubs. I had been pondering how to fork the I2C line. Here is my attempt to make an I2C hub from male h..." | Read more » over 2 years ago
cfastie "I figured out what I was doing wrong with the real time clock. This line in a sketch: RTC.adjust(DateTime((__DATE__), (__TIME__))); will set t..." | Read more » over 2 years ago
cfastie "A nice thing about DuPont jumper wires is that each wire has a separate connector. So pin pitch does not matter (if it is at least 0.1 inch, the Ar..." | Read more » over 2 years ago
cfastie "That's a nice little I2C hub. Maybe it would be easy to make something like that for DuPont wires from strips of male header: But somebody would..." | Read more » over 2 years ago
cfastie "Those male + female headers would be really handy. This is the first time I have used a Nano without headers, and it makes a really tidy package fo..." | Read more » almost 3 years ago
cfastie "Hi Liz, The components wired together weigh 33 grams and the bracket weighs 8 g. The batteries to power it weigh a lot more than that. A case with ..." | Read more » almost 3 years ago
cfastie "Thanks Bob, that's encouraging. My bricked card just gets hot to the touch when I put it into a card reader. I don't have much hope for it. " | Read more » over 3 years ago