What I want to do: I am trying to do NDVI for crop scouting in AZ, and I am using a modified Mobi...
Public Lab is an open community which collaboratively develops accessible, open source, Do-It-Yourself technologies for investigating local environmental health and justice issues.
This is a testing site only. See the live Public Lab site here »
All topics »
If you cannot use the ReCaptcha to verify you are not a bot, use this alternative verification.
As an open source community, we believe in open licensing of content so that other members of the community can leverage your work legally -- with attribution, of course. By joining the Public Lab site, you agree to release the content you post here under a Creative Commons Attribution Sharealike license, and the hardware designs you post under the CERN Open Hardware License 1.1 (full text). This has the added benefit that others must share their improvements in turn with you.
sign up to join the Public Lab community
Forgot your password? Reset it here
The white balance looks good. I think those are the settings used by Public Lab. But experimenting with similar numbers could produce better results for you.
The focus does not look very good. You should be able to get much crisper photos. But if your goal is NDVI, crisp focus does not matter.
Your photo produces a reasonable looking NDVI image.
You should be able to differentiate plants from non-plants most of the time.
Reply to this comment...
Log in to comment
Can i know the real use of adding the filters....just taking off the infrared filter and getting RGB IR channels and separating those channels later would work the same right? Correct me if i am wrong....whats the real use of filters?
Look forward to your response.
Is this a question? Click here to post it to the Questions page.
When the NIR cut filter is removed from a camera, all three color channels capture NIR light in addition to the color they originally captured (R, G, or B). So NIR is mixed with visible light in all channels in unknown proportions.
Adding certain colored filters can allow one of the color channels to capture only NIR light and another to capture mostly visible light.
More here: https://publiclab.org/wiki/ndvi-plots-ir-kit
First of all thanks for your prompt reply. I have few more things which i am confused about:
1. If i put a red filter, so my red channel would mostly contain red spectrum while the blue will mostly contain infrared spectrum, what about the green channel, will i get green visible light in green channel, this is because i plan to compute NDWI index, for water content detection?
2. What is the purpose/need for custom white balance?
3. For blue filters, does it only allow blue spectrum and near infrared only?
4. If there are any related literatures, journals published by the Public labs team, please share the link.
Thank you once again.
Thanks for sharing the publication. My main purpose is to test the potential of calculating NDVI using modified infrared mobius actioncam (factory modified). My objective includes the efficiently stitching the multiple images (~ 80 images) collected from DJI Phantom 3 Professional and running the algorithm for calculating NDVI. However, i have not quite focused on calibrating the NDVI images due to which my initial flight data didn't work good. So, i trying to figure out best way to calibrate the images for NDVI.
I have mobius actioncam modified infrared with 87 mm Standard A lens fitted with red filter by public labs. But due to the wide angle lens i have huge distortion and fish eye effect so i plan to buy 6 mm modified infrared security lens from public labs. Which filter would you suggest me to add to my upcoming 6 mm security lens, as for now i have been suggested by Frank(a member of public labs to add the blue filter). I wanted to know your views before purchasing it.
Is the red filter from public lab infragram project similar to Wratten 15 filter as you mentioned above?
Stitching Mobius photos can be hard. The longer lens will help. Correcting the distortion afterwards can help. A high shutter speed and vibration damping can help. I assume you can also program the DJI to stop and hover for each photo. If so it would be a mistake not to do that.
I have not seen any good NDVI results from a Mobius with a blue filter. I found a red filter gave much better results. But I have not done much infrared work with the Mobius.
The red filter from Public Lab is Rosco #19 which is superficially similar to the Wratten 25.
The blue filter from Public Lab is Rosco #2007 which is superficially similar to the Wratten 47 or Schott BG3.
The Wratten 15 is yellow-orange.
Great.... For the accurate dense reconstruction with my mobius setup with wide angle lens, i have figured out best way. There is no option to work out with the shutter speed so i have made a mission plan with a speed of 9 m/s and i take timelapse every 5 sec which would be sufficient for getting good overlap. For, vibration removal i have setup something like this: https://www.youtube.com/watch?v=PuNhiJAVum0
I will also be taking two flights one after another, where i will maintain exactly perpendicular flight direction with +- 20 m change in altitude between the flights. This would help me in getting accurate stiching of multiple images (~ 90 images). After some pre and post calibration i think i will get better results with wide angle A lens mobius.
I will test this configuration and share my results in public labs.
Thank you Chrish. You guys are wonderful and passionate.
Cheers public labs team
Login to comment.
This is part of:
Public Lab is open for anyone and will always be free. By signing up you'll join a diverse group of community researchers and tap into a lot of grassroots expertise.